24/7 Emergency Leak Detection and Repair Services – 727-239-0089

Underground Hot Water Leak Detection From $89

You have a Leak? You have a High Water Bill?
Call the Pros Before the Damage Spreads.

High Water Bill?

Book A Service Call

CFC # 1432423

Warm Floors. Endless Water Heater. Rising Bills.

The Leak You Can Feel Before You See

A hot water leak underground announces itself in strange ways. A patch of tile that feels warm under bare feet. A water heater that runs all night. An electric bill and a water bill climbing together. If any of that sounds familiar, call (727) 239-0089. The service call is $89 and we find most hot water leaks in a single visit.

Pricing stays simple: $89 service call, $89 per hour for detection, $178 total for the first hour, capped at $350. No digging first, no guesswork.

Why Hot Water Lines Fail First

In Pinellas County slab homes, the hot water line is almost always the first pipe to go. Hot water moves faster through copper, carries more dissolved oxygen, and expands the pipe with every cycle. After 50 years under a slab, that adds up to pinhole leaks. The hot side fails years before the cold side in most homes we visit.

The good news: hot water leaks are the easiest kind for us to find. Heat rises through concrete, so the leak paints a bright signature on our thermal camera. We often locate a hot water slab leak faster than any other type.

Slab Leak Detection

A hot water leak under the slab lights up on the thermal camera before we open anything.

Signs of an Underground Hot Water Leak

  • A warm or hot spot on the floor, usually tile or terrazzo
  • The water heater runs constantly or runs out of hot water fast
  • Water bill and electric or gas bill rising together
  • The sound of running water when everything is off
  • Damp baseboards or flooring near the warm spot
  • Hot water at the tap takes longer, or arrives lukewarm

The double bill is the tell most people miss. You pay for the leaked water, and you pay again to heat it, all day, every day.

How We Find It Without Digging

  1. Meter test and hot side isolation. We shut the valve on the water heater. If the meter stops moving, the leak is on the hot side. That one step cuts the search in half.
  2. Thermal imaging. The slab above a hot water leak reads warmer than the surrounding concrete. The camera leads us to the zone.
  3. Acoustic confirmation. Ground microphones pinpoint the exact spot where pressurized water is escaping.
  4. Marked location and repair options. You get the spot marked on the floor, photos, a written finding, and honest repair paths: open the slab at one spot, or reroute the hot line overhead and abandon the failed section.

Should You Turn Off the Water Heater?

If you have a bad hot water leak and cannot get service same day, turning off the water heater breaker and the heater’s supply valve slows the loss and stops the reheating cycle. It is a bandage, not a fix, but it saves money overnight. We walk you through it on the phone when you call.

Underground Hot Water Leak Questions

Why is only part of my floor warm?

Heat from the leaking line rises straight up through the slab. The warm patch sits directly above the leak, which is exactly why we can locate these leaks so precisely.

Is a warm floor always a leak?

Not always. A hot water line that simply runs under that spot can warm the floor slightly. The difference is change: a warm spot that is new, growing, or paired with a rising bill almost always means a leak.

Can the line be fixed without jackhammering the whole floor?

Yes. Because we mark the exact spot, a repair opens one small section, or we reroute the hot line overhead and never open the slab at all. Precise detection is what keeps the repair small.

How fast should I act?

Faster than a cold water leak. You are paying for the water and the energy to heat it, and constant heat and moisture under a slab damage flooring adhesives and invite mold. Call (727) 239-0089, the service call is $89.

(727) 239-0089